Spray with Confidence: Titan 440 Paint Sprayer Demystified

For small-scale commercial and residential property maintenance tasks, the Titan 440 paint sprayer is the perfect tool. Effortlessly apply any common architectural primer, paint, or coating with this powerful electric airless sprayer. The industry’s best-selling sprayer just got better thanks to new features and improved functionality.  Intended to continuously spray between 50 and 100 gallons every week. In this blog, we will explore all about the titan 440 paint sprayer.

What Can It Spray?

The things that can be sprayed by Titan 440 Paint Sprayer include the latex, lacquers, enamels, stains, and other coatings with low to medium viscosities. Features In order to shield the main sealing lip and piston from abrasive coatings, Quad+ Packings are designed to wipe them clean during operation.

Using the Titan 440 Paint Sprayer

Press a button of the Titan 440 paint sprayer to directly transfer oil from the reservoir to the packings using AutoOilerTM.  A hammer is not necessary to open a stuck lower ball valve thanks to the Sureflo Pusher Valve (available on select units).  To expedite cleaning and flushing, utilize electronic pressure control with fast cleaning.  The PermaLifeTM Cylinder never wears out and never needs to be replaced, featuring a full-size manifold filter in its design.

New Versus Old Titan 440 Paint Sprayer

Now let us discuss the differences between the two Titan 440 models—the original design and the newer model that was released this year—and how the improvements have been made.

Firstly, the newer model of the Titan 440 paint sprayer has a brushless motor, which is more durable and can withstand power fluctuations. It also lasts longer and doesn’t have as many problems when powered by erratic power sources like generators or even just home power.

Because new construction isn’t as predictable and may experience surges or changes, the newer model has a nicer, more durable electric motor. Moreover, the motor is seven pounds lighter, meaning the weight difference between the two units is actually.

The fluid filter on them can save you a lot of trouble when you’re trying to lift and carry them around at seven pounds.The horizontal filter on the older model could cause paint to kind of stick in there during flushing, and if you’re doing significant color changes or even material changes, that could result in discoloration between color changes.

Moreover, it’s not quite as clean when you’re just running the machine. On the other hand, the newer model of Titan 440 paint sprayer is vertical and threads in over the stick in the middle there, so that’s nice for a couple of reasons you’re going to get less paint trapping in your fluid section.

Simple Solutions To The Issues You May Face

1.   The Unit Is Not Working

Connect the device. Reset the circuit breaker. To give the device power and raise the pressure setting, turn the pressure control knob in a clockwise direction. Examine or bring to a Titan-approved repair facility. Let the motor cool. Change the ON/OFF switch.

2.   The Unit Will Not Prime

To put the PRIME/SPRAY valve of the Titan 440 paint sprayer, in the PRIME position, turn it clockwise. Inspect the suction set/siphon tube connection and Use PTFE tape to re-tape or tighten the connection. Take out and clean the pump filter element. After removing the intake screen, clean. Take out the suction set and siphon tube, then clean.

3.   Pressure Is Not Being Created Or Maintained By The Unit

As directed by the spray gun’s instructions, replace the spray tip. Switch out the spray tip for one with a smaller opening. Observing the spray gun’s instructions that were included. To raise the pressure setting, turn the pressure control knob in a clockwise direction. Take out and clean the pump filter element. After removing the gun filter, clean. Clean up after removing the inlet screen. Clear the PRIME/SPRAY valve or replace it. Inspect the connection between the suction set and siphon tube, and either tighten it again or re-tape it with PTFE tape. Examine each connection for external leaks. Tighten any loose connections in the Titan 440 paint sprayer.

4.   Excessive surge at the spray gun

Change the hose out for an airless paint spray hose that is at least 50 feet long and 1/4″ grounded textile braid. Assemble a new spray tip by following the guidelines that included the spray gun. To reduce the spray pressure, turn the pressure control knob anticlockwise.

Conclusion

In conclusion, the Titan 440 paint sprayer is the best choice for unlimited projects. Designed to reliably spray between 50 and 100 gallons every week. In order to shield the main sealing lip and piston from abrasive coatings, Quad+ Packings is designed to wipe them clean during operation. Its golden features can never be compensated by any other paint sprayer. Just enjoy paint spraying!