How to Put Thread in a Sewing Machine

Though threading a sewing machine could appear intimidating to novices, taking on a sewing project can be thrilling and rewarding. Do not be alarmed! In this extensive guide, we’ll demystify how to put thread in a sewing machine in your sewing journey by taking you step-by-step through threading a sewing machine.

Your Sewing Machine: An Introduction

Let’s get acquainted with the main parts of a regular sewing machine before we get into the detailed instructions. Understanding these components will significantly simplify the threading process:

• Spool Pin: A little rod used to hold the thread spool.
• Channels that direct the thread from the spool to the needle are known as thread guides.
• Discs that control the thread’s tension are known as tension discs.
• Thread winding mechanism on a bobbin: the bobbin winder.
• Bobbin Case: Preserves the bottom thread by holding the bobbin.

Why Does My Sewing Machine Keep Unthreading – Causes And Solutions

How to Put Thread in a Sewing Machine: Step-by-Step Instructions

Step 1: Get Your Thread Ready

Selecting the correct thread type and color for your project should come first. Make sure the thread spool is firmly attached to the spool pin.

Step 2: Upper Thread Threading

Thread Guide: Use your machine’s specified thread guides to pass the thread through. See the handbook for your device to get these instructions.

Tension Discs: Pass your thread through each disc. These are essential for managing the upper thread’s tension.

Thread Take-Up Lever: Pass the thread via this moving lever, often located close to the machine’s front. Refer to the detailed guide provided by your machine’s manufacturer.

Needle Bar Thread Guide: Pass the needle through the needle bar thread guide and any other guides.

Needle: Thread the needle from front to back at this point. Leave a tail of thread after passing a few inches through the hand.

Step 3: Bobbin winding

If the bobbin on your sewing machine is top-loading, do the following:

Bobbin Winder: Usually found on the upper right corner of the device, place an empty bobbin on the bobbin winder.

Thread Guide: When navigating the bobbin winding thread guide, use the given path.

Attach the thread end to the bobbin and turn on the bobbin winder. Make sure the bobbin shuts off on its own when it fills up.

For further instructions on winding the bobbin if your machine has a front-loading bobbin, see the handbook.

Step 4: Insert the Bobbin

Bobbin Case: Carefully open the bobbin case and place the wound bobbin inside, paying attention to the orientation arrows on the subject.

Thread the Bobbin: Make sure the thread clicks into place by guiding it through the slit or tension spring and into the bobbin box.

Step 5: Select the Bobbin Thread

Hold the Needle Thread: Push the needle thread’s tail using your left hand.

Handwheel: To lower and then raise the needle, turn the handwheel in your direction (always toward you). This will display the bobbin thread loop.

Retrieve the Bobbin Thread: Pull up the bobbin thread loop with your fingers or tweezers. Draw the bobbin and needle threads to the rear of the device.

Step 6: Examine the Threads

Doing a few test stitches on a scrap piece of cloth is a good idea once you’ve threaded your machine successfully. This enables you to verify that the upper and lower threads operate smoothly and check the tension.

In summary

Sewing machine threading may appear complicated initially, but with experience, it will become instinctive. For detailed instructions and advice unique to the make and model of your machine, remember to reference the sewing machine manual.

Following this step-by-step tutorial, you’ll be well on your way to learning how to put thread in a sewing machine. Enjoy your sewing!